Description
This Upgrade set can give your LUTUM® v5, v4.6 and 5MD 3D Clay printer Dual extrusion capabilities.
If you like to print with a single nozzle please include the Dual nozzle (SKU00036) to print with a single tip.
The standard kit includes:
- v10 extruder with standard SST Auger
- 1 Aluminium cartridge set
- 4mm PU air tube with orion air coupler
- 1 spare pressure seal
- basic nozzle set
- no.22 key
- no.15 key
- cleaner brush set
Important notice:
This item can only be ordered in combination with a LUTUM® v5 clay Printer purchase.
If you are an existing client with a LUTUM® v5 Clay printer you can also order this item separately.
Please contact us first.
To install your extruder on third party equipment;
Set step count to 836 steps per mm. this value will gives good results with standard 3mm nozzle ad 3mm filament configurations in slicers.
Damage to your board or to the extruder motor due to incorrect wire connection is not warrented. You are responsible to correctly connect this extruder to your hardware.
You will need compressed air at maximum 6 bar (depending on clay viscosity) to pressurize the Cartridge. Without that pressure the extruder will not function.
We do not ship this set to private persons.
If you are an educational center and wish to purchase this item please contact us first.
If you Purchase this item without consulting us first we will return your paypal payment.
Any transfer or conversion cost will be deduced from your refund.
