Description
The LUTUM® Clay Master Value Pack
* picture may differ from actual contents
The metal cartrige replaces the old PVC type cartridge.
If you own or still use the old type cartridge please contact VormVrij for upgrade assistance prompty, your old cartridge may have reached its end of live service and should to be replaced.
The metal cartridges are easy to clean, it can be quickly dismantled into their various components.
When you need to prepare and store clay for larger volume production you do not need to purchase many cartridge sets.
The Master pack contains all the parts needed for unlimited clay production.
You can still supplement your Cartridge Master pack with additional low cost PolyCarbonate (PC) sleeves.
The clay storage and pressure vessel is made from Stainless steel, lightweight Aluminium and strong PC parts.
The maximum working pressure is 6 Bar and it comes with an easy snap-in PU type connector on top. It screws directly onto the extruder.
This cartridges can hold 700cc or 1400 cc clay volume (1kg / 2kg of printable clay).
The cartridge fits the existing LUTUM 4 extruder and with an optional adapter ring also fits previous extruders.
3 full cartridge sets Size S
3 extra PC-S sleeve sets
1 full cartridge set Size L
1 Size L ALuminium Vessel
3 extra PC-L sleeve sets
4 spare rubber seals
– Read the safety, assembly and maintenance instructions that came with your printer before you use this equipment.
– Always greese all threads with acid free vaseline before reassembly.
– This cartridge has a Maximum operating pressure of 6 Bar.
– When you find damage on the threads or the thread is skipping when tightening, discard an replace with a new component.
