Description
The LUTUM® 4M PRO| 3D CLAY PRINTER
Current lead time is 2 weeks.
The LUTUM 4M PRO model includes:
– V10 extruder.
– 2x Size S cartridge
– 4x empty clay sleeve.
– The 4M PRO runs on 32bit electronics with an integrated 4″ LCD screen.
General specifications:
– Robust Mechanics similar to our high end LUTUM versions..
– fully powder coated or anodized for easy cleaning.
– Stainless steel desk surface
– Moving parts like spindels and belts are protected or hidden inside the construction.
– internal power is 24v.
– The printer can print grogged clay up to 0.2mm at 25%.
– the build envelope size is 25x25x40cm – XYZ.
– the LUTUM extruders have excellent start stop and retract behaviour.
– the printer allows accelerated/decellerated movements and extrusion.
Upgrade possibilities:
– Full Toolset to complete the package.
– full nozzle set
– infrared height sensor
Included in the standard package:
1. LUTUM 4M PRO printer, 32bit 16GB storage
1. v10 Extruder
2 metal cartridge set S (700cc)
4 Poly-Carbonate sleeve to store prepared clay
1 extra pressure seal set
1 extra Auger seal
Euro Power cable
no.22 Key to open the cartridge and extruder
no.15 key to open de inner part of the extruder
±25x25cm plaster print bed.
This printer needs 6 bar air pressure to run, make sure you have a regulated air supply where you setup the machine. The air must be clean, oil free and dry. Make sure your installation has a water separation unit attached between the compressor and the printer. Damage to the pressure regulator of the printer due to oxidation is not covered by our warranty.
The printer supply air coupling is of the standard 14Ka male type (Orion).
Filling of the cartridges can be done by hand.
Properly prepared clay gives best print results.
When using more sleeves for printing larger amounts it is advised to fill cartridges with a pugmill.
You can a order an adapter for your pugmill to fill the PC sleeves.
Please contact us for further details on delivery schedules and other questions you might have
Technical specifications:
Technology: LDM
Printing volume: diameter 250mm x250 x H400mm
Nozzle diameter: 3mm standard (other sizes possible)
Layer resolution: min 0.5mm – max 3mm.
32bit version Max speed: 120mm /s with acclerations of 150mm/s2.
Materials: earthenware, stoneware etc.
TOLERANCE
Print bed deviation 1 mm over max distance
First layer 0.3mm / 100mm
Subsequent layers 0.1mm/250mm
EXTRUDERS
v10 stainless steel Extruder
Standard: nozzle diameter 4mm
In package: 4mm
SOFTWARE
Operating systems: WIndows, Mac, Linux
Software slicing: Prusa Slicer (recommended) – Simplify 3d – Cura
File type: .stl, .obj, .gcode,
INTERFACE
wifi, 4″touchscreen, USB for firmware , webinterface
PHYSICAL DIMENSIONS
Printer dimensions: 58x51x87 cm
Printer weight: 60kg
STANDARD EQUIPMENT
2 Nozzle, diam. 4mm
2 Cartridge-S Set
2 Empty Polycarbonate (PC) S-tube
1 Plaster print 25x25x5cm
1 No.22 key
1 No.15 key
1 Extruder seal
1 Auger seal
TECHNICAL INNOVATIONS
the best auger extruder on the market.
Accelerated performance delivers short print times with maximum printspeeds
Integrated air pressure control
Heavy built minimal vibration machine
Easy to use Interactive extrusion and speed controls
Print up to 40 cm tall!
Feb 2023
