{"id":1307,"date":"2018-01-09T11:15:02","date_gmt":"2018-01-09T11:15:02","guid":{"rendered":"https:\/\/vormvrij.nl\/3dclayprinting\/?p=1307"},"modified":"2018-01-10T09:46:59","modified_gmt":"2018-01-10T09:46:59","slug":"colored-porcelain-printing","status":"publish","type":"post","link":"https:\/\/vormvrij.nl\/3dclayprinting\/?p=1307","title":{"rendered":"Colored porcelain printing"},"content":{"rendered":"

author: Marlieke Wijnakker<\/small><\/p>\n

Experiments of an artist<\/h1>\n

Sanver \u00d6zg\u00fcven<\/a>, a ceramic artist and assistant professor in Turkey, recently completed his Ceramics PhD at Hacettepe University Fine Art Institute. In 2015 he was awarded at the Dumlupinar Ceramic Competition ‘Keramika’ and in 2016 at the 5th International Young Ceramists Tile Competition he received the Filo Incentive Award. He gives lectures and demonstrations at different Universities in Turkey and the United Kingdom. And participated in numerous exhibitions as well as a solo Ceramic\u00a0Exhibition called “Times and Words”\u00a0 in Lithuana, 2016<\/em><\/p>\n

\"\"Nautilus Houses<\/small><\/p>\n

Since 2015 Sanver has been experimenting with the 3d printing of ceramics on a JK Delta Ceramic Printer<\/a>. After the first test prints he soon started combining 3D prints with handwork like you can see in the ‘Nautilus Houses’.<\/p>\n

\"\"<\/p>\n

His designs are made by using Rhino and Meshmixer and the green cups have been glazed afterwards.<\/p>\n

\"\"<\/p>\n

The latest collection, called ‘Polyvase Series’ is printed with colored porcelain. To color the porcelain clay he uses different amounts of stains between 2% and 7%.<\/p>\n

\"\"Polyvase Series<\/small><\/p>\n

Theshort video below shows the creation of his latest Series<\/p>\n

The steps shown in the video give a lot of insight to the design process used.
\nStarting with Rhino to draw half the contour of the vase, this line is then revolved around a central axis to create a solid tubular form. The base geometry of the vase. This design is exported as STL and imported in Meshmixer, a direct Mesh manipulator program from Autodesk. In Meshmixer you can manipulate the triangles of the STL file. By lowering the mesh count the program calculates a new (lower resolution) shape. Finally this shape is exported to Cura, the well known slicer from Ultimaker. After giving the correct parameters like layer height, nozzle width and print speed, the file is finally send to the printer.<\/p>\n